Page 4 - Bulk solids

EBRO PRODUCTS | INFLAS PRO ▪ INFLAS ECO

INFLAS ®

When abrasive media is handled, the opening and closing of the valve can result in
extreme wear of the liner. This leads to frequent service intervals and low system efficiency.
Sensitive products (pet food, cereal ...) can be damaged by the mechanical force of the closing
valve.

The EBRO Inflas valve solves these problems. The diameter of the disc is smaller than the inner
diameter of the liner, so there will be a gap when the valve is closed. Then the seat inflates
against the disc providing bubble tight seal in both directions of flow.

Prior to opening, the air pressure is vented, releasing the mechanical seal, and the disc opens
at reduced torque.

Nominal diameter: DN 80 - DN 600
Temperature range: -40 °C to + 200 °C
(depending on pressure, medium and material)
Operating pressure: max. 16 bar

INFLAS PRO: Advanced control technology for
critical applications that demand
sequence verification and faster
cycle times
INFLAS ECO: Cost effective mechanical solution
for Inflas seat inflation and deflation

INFLAS PRO & INFLAS ECO
Low wear thru inflatable liner

Inflas PRO

Inflas ECO

CLOSED CLOSED
OPEN PRESSURISED
UNSEALED SEALED

4